Home > To Open > Motion Failed To Open Video Device /dev/video0

Motion Failed To Open Video Device /dev/video0

Contents

Final Tweeks Web Port You could change the web interface port to 80 (from the default 8081), so that you can just browse to the IP address without having to put Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Reply Tim Fesig says: March 7, 2013 at 11:39 PM Found that motion puts images in /tmp/motion… Might that fill the SD card after some time???? permalinkembedsavegive gold[–]T31337[S] 0 points1 point2 points 2 years ago(2 children)/dev/video0 /dev/video1 permalinkembedsaveparentgive gold[–]Ticklethis275 0 points1 point2 points 2 years ago(1 child)In motion.conf change videodevice /dev/video0 to videodevice /dev/video1 Then sudo service motion reload sudo service http://popupjammer.com/to-open/vid-v4lx-start-failed-to-open-video-device-dev-video0.html

http://elinux.org/RPi_VerifiedPeripherals#USB_Webcam I tried a logitech quickcam with ext. Run around in front of your camera to trigger motion detection, and when you come back your images directory should have some .avi movies in it. Reply Sanjeev says: August 26, 2013 at 11:18 AM Hi, thank you for your post, it is brill. It worked right away without any extra configuration!

Motion Failed To Open Video Device /dev/video0

The base model is only $20 $5!. I’m running wheezy and it the motion feed works great in Chromium, but this sends the CPU running at 100%. Thanks for figuring this out!

Jump to navigation Advertisement News for the Open Source Professional Login / Create Account Facebook Twitter Google Plus LinkedIn Feeds Brought to you by NewsEnterprise Desktop Mobile & Embedded Open Source Folder-by-type or Folder-by-feature Where should a galactic capital be? Motion records movies and snapshots in JPEG, PPM, and MPEG formats, and you can view these remotely in a Web browser thanks to Motion's built-in HTTP server. Unable To Open Video Device Raspberry Pi Usb Camera I got one cam working with the above steps, is it possible to stream more than one.

[email protected] /etc/default $ more motion # set to ‘yes' to enable the motion daemon start_motion_daemon=no [email protected] /etc/default $ sudo nano motion [email protected] /etc/default $ sudo service motion start Starting motion detection Vid_v4lx_start: Failed To Open Video Device /dev/video0: The specs say that can effective resolution is Up to 352 x 288. Er worden […] Reply Mike Harris How to use a Raspberry Pi as a server - mjrharris.co.uk says: May 29, 2013 at 10:45 AM […] web cam […] Reply Pete says: Worried about whether it is running ok or want to check some of the feed remotely.

Thanks for al the help, Jan Reply Graham says: May 25, 2013 at 7:39 AM Hi Tom, Great tutorial, thanks! Sudo Modprobe Bcm2835-v4l2 [email protected] /etc/default $ Thanks again! What is a real-world metaphor for irrational numbers? Reply Tom says: October 4, 2015 at 3:22 PM Yes, also depends on how good the power source to the Raspberry Pi is, most setups however will end up needing some

Vid_v4lx_start: Failed To Open Video Device /dev/video0:

They stop working properly if you open Windows. https://ubuntuforums.org/showthread.php?t=1439611 Cheers Dave Reply Richard Scholl says: February 13, 2013 at 5:17 PM A very good description for the Raspberry Webcam. Motion Failed To Open Video Device /dev/video0 Can u pls point me at some tutorial for doing this. Failed To Open Video Device /dev/video0: No Such File Or Directory Thanks Reply Aminga says: April 28, 2013 at 1:23 AM I get this when I do "sudo motion -n": [0] Thread 1 - Watchdog timeout, trying to do a graceful restart

I can get my live stream working by rebooting my PI and, following a reboot, entering the command sudo modprobe bcm2835-v4l2 (only with the command removed from the RC.local file). http://popupjammer.com/to-open/smbclient-failed-to-open-var-lib-samba-private-secrets-tdb.html Get the software ready To start with we're assuming that you have a working Raspberry Pi on a local network with internet access, the next step is to update your Pi Thanx for the great tutorial !!! Reply morten-olsen says: March 10, 2013 at 5:23 AM You can use "output_normal off" to remove this, it seems Reply Nelson Minar says: March 10, 2013 at 6:36 PM What a Unable To Open Video Device Motion Ubuntu

jr Reply Tom says: October 4, 2015 at 3:20 PM I've got two of them setup without any stability issues, one's been up for over 3 months, and the files are I followed the instructions exactly, but even though motion is running, when I try to access the pi, all I get in Chrome is the message "This webpage is not available". Please explain in more detail so that dummies like me can understand it. 2: "You can change other settings but it’s recommend you don’t take more than 2 frames" Do you this content I am new to python and reasonably good with C programming.

Default: not defined # Syntax is user:password netcam_userpass admin:mypassword # Target base directory for pictures and films # Recommended to use absolute path. (Default: current working directory) target_dir /home/carla/motion-images # Codec Raspberry Pi Camera Device Name Reply Richard says: April 18, 2013 at 10:52 AM Same problem here. This is when using the 8081 port.

In Midori I get: Error - http://10.0.0.95:8080/ The page ‘http://10.0.0.95:8080/' couldn't be loaded.

You could actually go one step further and change "webcam_port" to zero for one of your tests, that will disable the web server but keep your snapshot functionality running, your not Reply John Wiggins says: June 2, 2015 at 7:04 AM I'm having trouble as I don't care about saving any image taken, all I want is the stream. Owner ccrisan commented Feb 5, 2016 I'm glad it could help. Device Doesn't Support Vidioc_g_std Common issue then with Logitech devices?

Any help VERY gratefully received... http://raspberrypi.stackexchange.com/questions/4984/webcam-disconnects-after-a-few-hours-of-running-motion Reply Tom says: February 15, 2013 at 8:58 PM Hi Weston, Thanks for the comment, unfortunately there isn't any easy answer to get it working, however here are a few I can't find this in the text file. have a peek at these guys Any ideas for an alternative browser will be really helpful.

The webcam does work very slowly using CHEESE and it uses 100% CPU resources, any help or advice much appreciated.